Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Brea, CA | Square Deal Contractors
Square Deal Contractors provides independent Unilock installation and repair across Brea, CA. We’re not an authorized Unilock dealer, and we’ll say that plainly. What we are is a full-scope general contractor that has pulled, re-set, and rebuilt Unilock paver driveways, patios, and retaining walls on Brea’s clay soils and hillside lots long enough to know exactly what fails here and why. Call (866) 623-7205 for a free estimate on your Unilock project.
Why Brea Residents Choose Us for Unilock Service
We handle the whole job, from demolition and base re-compaction to final polymeric sand, which means you’re not coordinating a paver crew, a grading contractor, and a separate haul-off. That single-contract accountability matters in Brea, where most paver projects start with pulling an existing concrete drive or lawn strip rather than building fresh. Nolan Breckett, our owner, grew up in Baker Ranch and has spent nearly three decades watching South Orange County build itself out. He learned the trade through the construction technology program at Saddleback College, and that grounding in how structures actually behave shows up in how we sequence paver work here. We have installed and repaired Unilock pavers, walls, and steps across North Orange County for years — including Unilock service in Placentia and nearby cities — so we know how their plank, slab, and retaining-wall systems actually perform on Brea’s clay and slope-edge lots rather than just how they photograph in a catalog.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Brea
- Efflorescence and salt bloom on Brussels Block and Beacon Hill slabs. Brea’s dry summers pull moisture upward through the paver, and the first winter rain pushes salts to the surface as that white, chalky film. Where the base was never compacted properly or drainage wasn’t cut, the bloom comes back season after season. We clean the surface and address the base and drainage that cause the recurring bloom, not just the cosmetic layer.
- Polymeric sand washout and joint erosion on drive aprons and patio edges. Santa Ana winds drive dust and dry grit into joints, and winter rain then flushes the sand out. Pavers start to rock and shift, especially at the apron where the driveway meets the garage slab. We re-sand with a quality polymeric product and re-lock the edge restraint so the assembly holds.
- Retaining wall block bulging or leaning on hillside lots. Trellis and Rivenstone wall blocks are only as good as what’s behind them. On Brea’s upper-elevation homes, walls built without proper geogrid and drainage gravel behind the block eventually lean forward as soil pressure builds. We rebuild those walls with the reinforcement and drainage the slope actually demands.
- Paver settlement and lippage over clay soils. The transition from Brea’s flat older downtown lots to sloped entries shows up as trip edges and ponding at garage aprons. Clay expands and contracts with moisture, and a base that wasn’t re-compacted after the old concrete came out will settle unevenly. We pull, re-grade, re-compact, and re-set pavers so the grade drains and the surface stays flush.
- Edge restraint failure against original mid-century garage slabs. Brea’s 1950s ranch homes often have garage aprons already at their original height. When a contractor sets new pavers without proper edge restraint, the outside edge migrates outward within a season. We anchor the perimeter so pavers stay locked against the existing slab.
Unilock Service in Brea: What Local Conditions Mean for Your Equipment
Brea is a built-out North Orange County suburb where most construction work is not new ground-up building but incremental transformation of a nearly fully-developed 1950s to 1990s housing stock. Tight lot-coverage limits mean most paver work here is a swap of an existing concrete drive or lawn strip rather than new paving. The job is almost always removal, base re-build over existing graded soil, and edge restraint against a 1950s garage slab that’s already at its original height. That’s a different job than what a fresh suburban lot in a neighboring city would need — even our Unilock in Yorba Linda work follows different rules — and it’s why we don’t treat Unilock installation in Brea as a generic paver drop. The hillside and canyon-edge homes around Brea’s upper elevations sit on engineered foundations and slopes that make soil, drainage, and retaining-wall work far more consequential than on the flat older lots downtown. A deck or addition there often triggers grading and slope-stability review that the same project on a 1950s flat-lot home never would.
Unilock Models & Products We Service in Brea
We work with the full Unilock lineup you’ll find across Brea. Brussels Block, the tumbled concrete paver, shows up on driveways and patios throughout the city. Beacon Hill Flagstone, the large-format slab paver, is common on newer hillside homes. Trellis and Rivenstone wall block handle retaining duty on sloped lots. Copthorne and Town Hall plank pavers work well for walkways and drive aprons. Our approach to parts is straightforward: we source genuine Unilock units for visible field, caps, and borders so color and dimension match the existing run. Where aftermarket base material, geogrid, or polymeric sand performs better for Brea’s clay and slope conditions, we use it and tell you why. We re-set and re-sand a sound Unilock assembly before we ever recommend tearing out pavers that are still structurally good.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Brea
What you’ll pay depends on what’s under the pavers, not just the paver line you pick. Removal of existing concrete, base depth, slope correction, and drainage all drive the number. Here are the ranges we typically see on Brea projects:
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Our free estimate includes a written, itemized scope so you know exactly what’s included before any work starts. No change orders that show up mid-project. Call (866) 623-7205 to schedule yours.
Serving Brea, CA — Our Local Coverage Area
We’re based in the Brea area and know this community well. We also provide Unilock in La Habra and surrounding cities. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Brea
Yes. We source genuine Unilock Brussels Block units for the visible field, caps, and borders so the color and dimension match the original run. The key is that we also re-compact the base and re-sand the surrounding joints, so the repaired section doesn’t settle differently from the rest of the driveway. Call (866) 623-7205 for an exact quote on your repair.
That white film is efflorescence, the result of Brea’s dry summer pulling moisture upward through the paver and the first winter rain pushing dissolved salts to the surface. It’s more persistent where the base wasn’t compacted properly or drainage was never cut. We clean the surface and fix the base and drainage so the bloom doesn’t return every year. Call (866) 623-7205 and we’ll take a look.
Yes, and it’s not close. Hillside walls in Brea’s upper elevations need engineered geogrid reinforcement and drainage gravel behind the block to hold back soil pressure on a slope. A flat downtown lot with a low garden wall can often get by with a simpler build. We design the wall to the slope conditions, not the other way around.
In many cases, replacing an existing concrete drive with pavers at the same footprint won’t change your lot coverage, but if you’re expanding the paved area or altering drainage patterns, Brea’s planning department may want to review it. We’ll tell you what’s likely to trigger review before you commit to the project. Call (866) 623-7205 and we’ll walk through your specific lot.
The two things that hold a paver assembly together are edge restraint and properly compacted polymeric sand in the joints. Santa Ana winds dry out and erode loose joint sand, and winter rain then washes through. We re-sand with a quality polymeric product and lock the perimeter with edge restraint so the pavers stay put. For an exact assessment of your driveway or patio, call (866) 623-7205.
Service Areas Near Brea
We run Unilock paver and wall work throughout North Orange County and the surrounding foothills. You’ll find us in Placentia, Fullerton, Stanton, Westminster, and Norco, plus the nearby communities of Lakeland Village and Los Serranos. If you’re in one of those areas, reach out and we’ll schedule a look. For Unilock work in Los Serranos specifically, see our Unilock service in Los Serranos page. For Sedco Hills, check Unilock service in Sedco Hills. We also maintain a full Brea service area page if you want to see where else we cover.
Book Your Unilock Service in Brea Today
We’ll tell you exactly what’s in the scope, what it costs, and why we’re recommending what we’re recommending. From roofline to backyard, one contractor, every phase. Call (866) 623-7205 to schedule your free estimate. Unilock sales & service information is also available on our brand hub.
Written by Nolan Breckett, Owner at Square Deal Contractors, serving Brea and North Orange County. Know what you’re getting into before the first nail goes in.