CertainTeed Construction Service Nationwide

Why Placentia Homeowners Choose CertainTeed Construction

We’re an independent contractor providing CertainTeed construction repair and installation across Placentia, covering both 92870 and 92871. Most homeowners call us when a CertainTeed roof or siding system starts showing Placentia-specific wear: algae streaking on shaded slopes, granule loss from years of Santa Ana-driven heat, or siding that’s buckled from thermal expansion. Our crews have installed and repaired CertainTeed Landmark, Presidential Shake, CedarBoards, and Symmetry systems for years, so we know exactly what fails, why it fails, and the lowest-cost fix that won’t void a warranty. We’re not a CertainTeed authorized dealer. We’re a full-scope general contractor who works with the product every week. Call (866) 623-7205 for a free estimate.

Call (866) 623-7205

Why Trust Square Deal Contractors for Your CertainTeed Construction?

CertainTeed makes good products. But any building material installed wrong, or left too long in Placentia’s semi-arid heat, will develop predictable problems. Our value is knowing the difference between a manufacturing defect, an installation error, and normal wear. That distinction determines whether a repair is a warranty claim, a targeted fix, or a full replacement. Nolan Breckett, our owner, grew up in Baker Ranch and cut his teeth in the construction technology program at Saddleback College. He’s spent nearly three decades working residential and light commercial projects across South Orange County, and he’s methodical about sequencing work so nothing has to be redone. That discipline carries into every CertainTeed roof and siding job we take on in Placentia. We’ll tell you exactly what’s failing, what it costs to fix, and whether replacement makes more sense. Know what you’re getting into before the first nail goes in.

Common CertainTeed Construction Problems We Fix in Placentia

These are the five CertainTeed issues we see most often on Placentia homes. If you recognize one, call us before it spreads.

• Landmark® TL Series shingle algae streaking: Placentia’s winter fog and morning marine layer leave north-facing roof slopes damp for hours longer than south slopes. That moisture feeds Gloeocapsa magma, the blue-green algae that leaves black streaks across Landmark shingles. The shingles aren’t failing structurally, but the staining shortens curb appeal and often signals trapped moisture in the granule layer. We treat the decking and install algae-resistant underlayment when we replace.
• Premature granule loss on Landmark shingles: After 12 to 15 years of Placentia’s hot, dry summers, we see significant granule shedding on south and west-facing slopes. Once enough granules are gone, the asphalt substrate bakes in direct sun and the shingles become brittle. Localized granule loss on a few shingles can be patched. Widespread loss means the roof is near its service life, and replacement is the honest call.
• Presidential Shake® polymer siding cracking at nail heads: This is an installation issue we encounter constantly on Placentia homes where the original crew nailed the panels too tight. Polymer expands and contracts with temperature swings. When a panel can’t move, stress concentrates at the fastener, and hairline cracks radiate from the nail. The fix is removing the panel, inspecting the substrate, and reinstalling with proper clearance at every fastener.
• Symmetry® vinyl siding oil-canning: Placentia’s afternoon heat can cause vinyl panels to warp or wave if they were nailed flush against the sheathing without the required expansion gap, or if the installer skipped a flat backerboard over uneven framing. The waviness doesn’t usually leak, but it looks wrong from the curb. Correction means pulling the affected courses and resetting them correctly.
• CedarBoards™ siding moisture swelling at butt joints: CedarBoards is a polymer siding, but the butt joints still need to be sealed properly at installation. When joints are left open, winter rain and irrigation overspray wick behind the panel and swell the surrounding area. We see this on Placentia homes with landscaping close to exterior walls. The repair is targeted joint sealing and, in bad cases, panel replacement.

CertainTeed Parts & Our Repair-vs-Replace Approach

We source CertainTeed OEM shingles and siding accessories wherever possible because that’s the cleanest way to preserve warranty eligibility. Color matching is the practical reason too. CertainTeed runs product batches, and a mismatched bundle stands out on a roof. For underlayments, fasteners, and flashing, we use high-quality aftermarket materials that meet or exceed CertainTeed’s published specs. When damage is localized, like a few cracked Presidential Shake panels or a small patch of missing shingles, targeted repair makes sense and costs far less. When we see widespread granule loss, long algae runs on multiple slopes, or siding that’s failing across an entire elevation, we’ll tell you straight: replacement is the smarter long-term investment. We won’t sell you a patch job that buys you two years when a new system buys you twenty-five. For an exact quote on your CertainTeed repair or replacement, call (866) 623-7205.

Our CertainTeed Service Process – Step by Step

1. 1
   Diagnosis: We inspect the entire CertainTeed system, not just the spot you called about. On a roof, that means walking every slope, checking flashing at penetrations, and looking at the attic for moisture signs. On siding, we check fastener pattern, expansion gaps, and substrate condition.
2. 2
   Repair or installation: For repairs, we remove only what’s failing and match surrounding materials as closely as OEM batches allow. For installations, we follow CertainTeed’s published installation specs, including fastener placement, expansion clearance, and underlayment requirements.
3. 3
   Testing: Before we call the job done, we water-test repairs where practical and inspect every seam, joint, and lap. We look for anything that could become a call-back six months later.
4. 4
   Warranty documentation: We walk you through what’s covered by the CertainTeed manufacturer warranty versus our workmanship warranty, in writing. No vague promises. You leave knowing exactly what you’re covered for.

CertainTeed Products We Service & Install in Placentia

Our Placentia crews work with the full range of CertainTeed residential construction products. On the roofing side, that includes the Landmark TL Series and Landmark Pro asphalt shingles, along with CertainTeed underlayments and ridge accessories. For siding, we install and repair Presidential Shake polymer panels, CedarBoards insulated siding, and Symmetry vinyl siding. We keep common CertainTeed accessories in stock locally, including ridge caps, starter strips, and trim pieces, so most repair jobs don’t wait on freight. Larger orders go through our Orange County supplier network, typically arriving within a week.

We Also Service These Brands

CertainTeed is one of the 50-plus vetted manufacturers in our portfolio, but we’re not married to any single brand. On full remodels, we regularly work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. That depth matters when your CertainTeed roof or siding job is part of a larger Placentia renovation, and you want one contractor accountable for every phase.

FAQs – CertainTeed Construction Service in Placentia

Book Your CertainTeed Service in Placentia, CA

If your CertainTeed roof or siding is showing age, staining, cracking, or anything that doesn’t look right, we’ll inspect it and give you an honest assessment. Free estimates, written line-item scope, and no surprise invoices. Serving Placentia and the surrounding area. Call (866) 623-7205 to schedule.

Written by Nolan Breckett, Owner at Square Deal Contractors, serving Placentia and South Orange County.