Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Stanton, CA | Square Deal Contractors
We’re Square Deal Contractors, and we service KraftMaid cabinetry across Stanton. We repair, reface, and install KraftMaid kitchens and baths in 90680, and the job here is almost always a retrofit: tying new cabinets into a 1950s or 60s tract house with walls that haven’t been square since Eisenhower was in office. We’re an independent contractor, not a KraftMaid affiliate, which means we tell you what’s actually failing and whether it’s worth fixing or replacing. Call (866) 623-7205 for a free estimate. If you’re shopping the full KraftMaid line first, see our KraftMaid sales & service page.
Why Stanton Residents Choose Us for KraftMaid Service
Nolan Breckett, our owner, grew up watching South Orange County build itself out, and he learned the trade through the construction technology program at Saddleback College. That hands-on training is the reason he’s particular about framing tolerances and finish fit on KraftMaid cabinets. Know what you’re getting into before the first nail goes in, he’ll tell you. We carry that through every cabinet job we touch in Stanton.
Our crew has installed and serviced KraftMaid cabinetry across hundreds of Stanton-area kitchens and baths. We know the Vantage, Momentum, Deluxe, and Custom lines, the finish systems, and the failure points this climate produces. Because we’re independent, we diagnose what’s failing rather than pushing you toward a full gut. When your boxes and frames are sound, we repair them. When water damage or structural failure makes repair a short-lived fix, we’ll show you exactly why before we talk replacement.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Stanton
- Face-frame joints and mitered door corners opening up. Stanton runs hot and dry all summer, then the winter rains come through. Old 1950s and 60s stucco houses breathe more than people think, and the wood framing behind your cabinets swells and shrinks every season. We see KraftMaid face frames pull apart at the joints and mitered door corners open up as that cycle repeats year after year.
- Thermofoil and laminate door skins peeling at the edges. Small tract kitchens in Stanton don’t vent well, especially when cabinets sit against an exterior wall. Heat and cooking moisture collect right at the door edges, and the thermofoil starts to lift. On KraftMaid Vantage and Momentum doors, that peeling typically starts along the sink run first.
- Drawer boxes and hinges failing from years of use. Soft-close dampers wear out. Drawers sag out of alignment. Hinges on Vantage and Momentum cabinets get sloppy from overloading and humidity swings. Most of these are honest repairs: new Blum or Grass slides, new hinges, a re-alignment. You don’t need a new kitchen for that.
- Particleboard and MDF case bottoms swelling from slow leaks. Stanton’s original supply lines and under-sink shutoffs are older than most of the homeowners living with them. A slow ice-maker or sink-supply leak swells the bottom of a sink base cabinet before you ever see water on the floor. We replace the damaged box, not the whole run, when the surrounding cases are sound.
- Finishes fading unevenly in direct sun. Stanton gets real sun, and kitchens on the west side of the house take it all afternoon. KraftMaid finishes fade, and doors on the same cabinet run can end up different shades. We do finish matching and targeted door or drawer-front replacement when a full respray isn’t worth it.
KraftMaid Service in Stanton: What Local Conditions Mean for Your Equipment
Stanton is nearly built out, so most KraftMaid installs here are retrofits into original 1950s – 60s cabinet footprints on compact tract lots. That single fact shapes more of the work than any brand spec. We’re constantly scribing new boxes to out-of-square walls, working in narrow side yards with no staging room, and coordinating a City of Stanton permit while the neighbor’s driveway sits four feet from your back wall. It isn’t new construction, and the people who price cabinet work as if it is will learn that lesson on your dime. On a 1962 single-story stucco tract house near Beach Blvd and Katella Ave, we pulled a tired KraftMaid Vantage kitchen where the thermofoil door skins had peeled along the sink run and two drawer boxes had swollen from a slow supply-line leak. We replaced the damaged boxes with OEM-matched components, re-squared and re-shimmed the remaining cabinets to the wavy original wall, and set a new quartz top with a matching backsplash, all within the original footprint and through a City of Stanton permit. That is the normal job here, not the exception. To see the full scope of where we work, visit our Stanton service area page.
KraftMaid Models & Products We Service in Stanton
We work on all four KraftMaid lines: Vantage, Momentum, Deluxe, and Custom, in both framed and frameless construction. When parts are available, we use OEM KraftMaid hinges, drawer slides, and touch-up kits so the fit and finish stay true. When OEM is discontinued or lead times stall a Stanton job, we move to proven aftermarket hardware from Blum or Grass. We stock common hinge patterns, slides, and touch-up colors locally so a small repair doesn’t wait three weeks on a parts truck.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Stanton
Every job gets a written line-item estimate before work starts. The table below shows what our Stanton-area KraftMaid work has run for completed projects, but your final number depends on condition, footprint, and whether you’re repairing, refacing, or doing a full kitchen.
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Bathroom Remodel | $9,000 – $28,000 |
What drives cost most in Stanton is the retrofit factor: out-of-square walls need more scribing, tight lots mean less room to stage materials, and older framing sometimes needs blocking before new cabinets go in. We explain every line item. Call (866) 623-7205 for your free estimate.
Serving Stanton, CA — Our Local Coverage Area
We’re based in the Stanton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Stanton
My KraftMaid thermofoil doors are peeling in my Stanton kitchen – can I reface instead of replacing the whole kitchen?
Yes, when the cabinet boxes and frames are structurally sound, refacing is the smarter move. We strip the failing thermofoil doors and drawer fronts, match a new finish or door style, and leave your boxes in place. The exception is water-damaged or swollen cases, which we replace individually. Call (866) 623-7205 and we’ll tell you honestly which route your kitchen needs.
Do I need a City of Stanton permit to swap KraftMaid cabinets or add an island?
Swapping cabinets in the same footprint usually doesn’t trigger a permit, but adding an island, moving plumbing, or changing electrical does. When we add an island with power or move a sink line, we pull the permit and close it out. For more on our service area, see Stanton service area.
Why do my KraftMaid drawers stick and doors sag after a few years in Stanton?
It’s mostly the climate cycle. Hot dry summers dry out the wood and loosen the hinge screws; winter humidity swells the case panels and throws the reveals off. Add years of daily use, and the soft-close dampers and drawer slides simply wear out. We re-align, replace slides and hinges, and re-shim to square. Call (866) 623-7205 and we’ll get it sorted.
Can you match my discontinued KraftMaid finish if I only need one cabinet or a few doors?
Usually, yes. We use OEM touch-up and finish kits where available, and when a finish is fully discontinued, we work with local finishing suppliers to match the color, sheen, and age of your existing doors. You may see a slight difference on very old sun-faded runs, and we’ll show you a sample before anything gets installed.
How do you handle KraftMaid installs on Stanton’s tight lots and narrow side setbacks?
We stage materials in our trucks and bring in only what fits through the door that day. We scribe to your walls rather than forcing the cabinets to the room, and we schedule site deliveries so nothing sits in a neighbor’s way overnight. The approach changes on every Stanton lot, but the result should be the same: a straight run in a house that isn’t. Reach out at (866) 623-7205 for a free estimate.
Service Areas Near Stanton
We serve Stanton and the surrounding cities, including Fullerton, Westminster, Placentia, and Garden Grove. If you’re just over the city line, we bring the same KraftMaid service to your project. See our KraftMaid service in Fullerton or KraftMaid service in Norco pages for details.
Book Your KraftMaid Service in Stanton Today
We’ll walk your cabinet run with you, show you what’s failing and why, and give you a written line-item estimate before any work starts. Call (866) 623-7205 to schedule your free estimate in Stanton.
Written by Nolan Breckett, Owner at Square Deal Contractors, serving Stanton and South Orange County.