Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Redlands, CA | Square Deal Contractors
We install and service Belgard segmental pavers, retaining-wall block, and SRW systems across Redlands, from the 92373 historic core up into the 92375 foothill lots, and we also handle Belgard repair in Loma Linda. Most of our Belgard work here splits into two problems: matching pre-1930 Craftsman character on the flats, or engineering for slope, retaining, and drainage on terraced hillside ground. If you’re pricing a Belgard patio, driveway, or wall in Redlands, call (866) 623-7205 for a free estimate.
As an independent contractor, we’re not tied to a dealer’s pallet. We work with the full Belgard catalog and pair it with whatever base, drainage, and engineering the lot actually needs. For more on our brand coverage, see our Belgard sales & service page.
Why Redlands Residents Choose Us for Belgard Service
We’ve set Belgard retaining walls, pavers, and slab systems on Redlands ground long enough to know where the brand specs hold and where local conditions demand more. A flat tract lot in 92374 behaves differently than a Smiley Heights tiered lot above downtown, and the difference is almost always base depth, drainage, and slope. Most contractors know Belgard catalog numbers. We know what the wall does after two wet winters and a Santa Ana season.
Nolan Breckett, our owner, grew up watching South Orange County build itself and learned the trade through Saddleback College’s construction technology program. He brings the same methodical sequencing to every Redlands Belgard job: identify what’s underground before ordering the first pallet of block.
We use Belgard’s own wall units, caps, and restraint where the system is proprietary. For base aggregate, geogrid, and joint sand, we spec aftermarket materials that meet or beat brand performance at a better price. That’s not corner-cutting; it’s honest material selection, and we’ll tell you exactly what we’re using and why.
Styles & brands we work with
Common Belgard Construction Problems We Solve in Redlands
Here are the Belgard failure patterns we see most often in Redlands, and what’s usually behind them:
- Terraced-wall leaning on hillside lots. Wall block installed with shallow or uncompacted base on a terraced foothill lot is the most common failure we correct. The SRW face course leans and the geogrid or backfill is undersized, so the whole wall creeps downhill after the first wet winter. We rebuild the base, re-set the Belgard units, and add proper drainage behind them.
- Paver fields heaving over clay or fill. In parts of 92374 and on older hillside fill, paver surfaces settle or heave because the base was treated like flatland tract ground. Joints open, surfaces undulate, and homeowners assume the pavers failed. The pavers are usually fine; the base wasn’t deep enough or compacted properly for Redlands soil.
- Santa Ana grit scouring paver joints. Fall winds drive fine sand and debris across south- and west-facing patios and driveways. The grit scours joint sand out of Belgard paver fields, and edges start to wander. We re-sand, re-restrain, and where the exposure is chronic, we adjust the jointing material to hold up better.
- Sun-bleached and chloride-stained pavers. Redlands summers routinely pass 100°F, and hard valley water leaves chloride staining and UV fade on Belgard pavers. Owners often think the material is defective. Usually it’s efflorescence and UV exposure, and we can restore or replace selectively rather than redo the whole field.
- Historic-core drainage conflicts. On 1900-1930 Craftsman lots in 92373, new Belgard patios and pavers often butt against older pier-and-beam foundations and original lot grading that drains poorly. If the pad isn’t graded and drained first, water finds the foundation. We sequence the drainage and grading work before a single paver goes down.
Belgard Service in Redlands: What Local Conditions Mean for Your Equipment
Redlands’ hillside lots above downtown and around Smiley Heights sit on older terraced footings. That changes almost everything about a Belgard retaining wall or paver pad project. The city and county both look hard at how the wall and drainage handle slope, which flat, newer-infill towns to the west never have to answer. We’ve done Colton Belgard service and work in Lakeland Village and Westminster where the main question was color and pattern. In Redlands, the first question is always what’s under the surface and where the water goes.
On a Smiley Heights lot climbing off the flats, a homeowner wanted a Belgard Arbel wall holding a new paver patio behind an older Craftsman. Our crew found the original tiered footing had no drainage behind it and the uphill side was loading the old wall. We over-excavated to compacted base, set geogrid and a drained gravel zone, and tied the new Belgard wall and Lafitt patio into a daylighted swale. The patio has stayed flat through two Santa Ana seasons. Know what you’re getting into before the first nail goes in.
Belgard Models & Products We Service in Redlands
We install and service the Belgard lines that hold up best in Redlands conditions:
- Belgard Mega Arbel / Arbel wall block for SRW retaining-wall systems on sloped and terraced lots.
- Belgard Lafitt Rustic Slab pavers for patios and walkways where a weathered, Craftsman-compatible look matters in the historic core.
- Belgard Catalina Grana and Catalina slab pavers for driveways and larger flatwork.
- Belgard Dimensions and Britton paver slabs for modern layouts and larger-format surface work.
If the wall or paver field is sound but the base or drainage failed, we rebuild the base and reset the Belgard units rather than sell a full replacement. Where the system is proprietary, we use Belgard’s own wall units and caps. For base aggregate, geogrid, and joint sand, we use quality aftermarket material that performs equal or better. That gives Redlands homeowners a faster turnaround and a lower bill without touching the visible surface quality.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Redlands
What you’ll pay depends on lot conditions first, then product selection. A flat lot in 92374 with clean access costs less than a Smiley Heights tiered lot that needs over-excavation, geogrid, and drainage work before the first block is set. Here are working ranges for the main Belgard scopes we quote in Redlands:
| Service | Typical Redlands Range |
|---|---|
| Belgard Paver Patio Installation | $3,500 – $11,000 |
| Belgard Paver Driveway Installation | $7,000 – $18,000 |
| Belgard Retaining Wall / Wall Block (portion of patio/driveway scope) | $3,500 – $11,000 |
Every estimate is written line-item, with the base, drainage, and materials separated so you can see exactly what drives the number. Call (866) 623-7205 and we’ll come out, look at your lot, and give you a real number, free.
Serving Redlands, CA — Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Redlands
No. We’re an independent Redlands General Contractor that installs and services Belgard products alongside a broad portfolio of other vetted brands. That independence means we spec what the lot needs, not what a single supplier relationship pushes.
Yes, where it matters. We use Belgard’s own wall units, matching caps, and restraint systems because those are proprietary. For base aggregate, geogrid, and joint sand, we use aftermarket materials that perform equal or better at a lower cost. We’ll tell you exactly what’s going into the job and why.
We work with Mega Arbel and Arbel wall block, Lafitt Rustic Slab, Catalina Grana, Catalina slab, Dimensions, and Britton paver slabs. If you have an existing Belgard surface that’s failing, we’ll assess whether the units themselves are sound or the base and drainage underneath failed. More often it’s the base.
Most paver patios take 3-7 working days once excavation starts. Retaining walls on sloped Smiley Heights lots run longer because of over-excavation, drainage, and compaction time. A wall that needs engineering review adds lead time before we set a single block. Call (866) 623-7205 and we’ll give you a realistic schedule for your lot.
Most Belgard retaining wall scopes tied to a patio or driveway run $3,500 – $11,000, though a tall engineered wall on a steep foothill lot can exceed that once geogrid, drainage, and structural review are factored in. The lot conditions drive the number more than the block choice. Call (866) 623-7205 for a free written estimate, no charge.
Service Areas Near Redlands
Most of our Belgard work is in Redlands proper, but we regularly take projects in the wider Redlands service area, including Placentia, Norco, Fullerton, and Stanton. For Belgard-specific work east and west of Redlands, see Belgard service in Highland and Belgard service in Mentone.
Book Your Belgard Service in Redlands Today
If you’re planning a Belgard paver patio, driveway, or retaining wall in Redlands, or exploring our Home Remodeling in Redlands, the sooner we see your lot, the sooner you’ll know your real number. Call (866) 623-7205 to schedule a free estimate. We’ll walk the site, check the slope and drainage, and give you a written line-item quote.
Written by Nolan Breckett, Owner at Square Deal Contractors, serving Redlands and the Inland Empire.