Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Lakeview, CA | Square Deal Contractors
We provide independent Jerith fence and gate service across Lakeview, CA. We install and repair Jerith vinyl and aluminum fencing, and what makes our work different here is that we plan every project around Lakeview’s unincorporated status: well and septic approvals from Riverside County often sit on top of the building permit. If you need Jerith fencing installed, repaired, or worked into a larger addition, call Square Deal Contractors at (866) 623-7205 for a free estimate.
Why Lakeview Residents Choose Us for Jerith Service
We’ve installed and repaired Jerith vinyl and aluminum fencing and railing for years across the Lakeview area, so we know how their profiles, posts, and bracket hardware actually hold up in this valley’s sun and wind. We’re an independent contractor, not affiliated with or authorized by Jerith, and we source Jerith components so repairs match the original system instead of being cobbled together with whatever is on the shelf.
Nolan Breckett, our owner, learned construction the hands-on way and has spent decades working in South Orange County and the Inland Empire. He’s methodical about sequencing work so nothing has to be redone, whether it’s Jerith service in Nuevo or a project closer to home. That matters when you’re dealing with a fence line that has to clear a septic field, avoid a well head, and survive a Santa Ana wind event. We don’t guess at setbacks. We look at the property, check the county requirements, and tell you exactly what has to happen before we dig. Know what you’re getting into before the first nail goes in.
We carry Jerith pickets, rails, posts, and brackets locally for faster turnaround in Lakeview, and when a discontinued color or hardware type comes up, we tell you plainly what’s OEM and what’s a quality aftermarket substitute. No runaround, no surprise invoices.
Styles & brands we work with







Common Jerith Construction Problems We Solve in Lakeview
- Sun-baked vinyl pickets on south- and west-facing runs. Lakeview gets months of intense semi-arid heat, and Jerith vinyl pickets on the afternoon-sun side of a property fade, chalk, and eventually go brittle. The typical failure is a crack right at the rail insertion point. We replace the affected pickets with matched Jerith components rather than redoing the whole run when the rails and posts are still sound.
- Santa Ana wind events racking fence lines. When sustained winds hit aluminum panels set in shallow footings, the whole line can rack and pull post bases. This is a real problem in this valley. We reset posts in properly deepened footings sized for the wind load and the soil, then re-square the panels.
- Gate sag and hinge wear on Jerith aluminum gates. Years of heat cycling and wind load show up as dragging latches and misaligned panels. Usually it’s the hinges or the post that has shifted, not the gate frame. We replace hinges, reset posts where needed, and get the latch working clean again.
- Post and footing failure at the soil line on vinyl runs. Lakeview’s expansive soil swells and shrinks with whatever moisture it gets, and posts heave or the steel post insert rusts where it meets the ground. The vinyl itself is often fine. We reset the post, correct the embedment depth, and reuse the sound panels.
- Pool-code fence sections for older lots. Homes with pools or planned pools need fence sections that meet current pool-code height and picket spacing. We install Jerith picket and pool-code sections the county will sign off on.
Jerith Service in Lakeview: What Local Conditions Mean for Your Equipment
Because Lakeview is unincorporated, a fence or addition project here can require Riverside County well and septic sign-off in addition to the building permit. Those approval layers don’t apply in incorporated cities like Riverside or Corona. For a Jerith fence line, that means the layout has to account for setbacks, septic field locations, and well clearances from the start, not after the footer holes are dug. We’ve done enough work on larger-lot properties off the ranch-and-custom-home streets to know where the county will push back, and we plan post lines around those limits before the first auger goes in the ground. That’s the difference between a permit that clears in one pass and a project that stalls for weeks.
On a larger-lot property off those same streets, we replaced a sun-brittled Jerith vinyl privacy run where several pickets had cracked at the rails and two posts had heaved in the expansive soil. We reset the posts in properly deepened footings, reused the sound OEM Jerith panels and rails, and swapped in matched pickets for the failed sections. Our crew also re-hung a sagging Jerith aluminum gate with new hinges so it latched clean again heading into Santa Ana season, just like we’d do for a Romoland Jerith service call.
Jerith Models & Products We Service in Lakeview
We service the full Jerith residential line we see on Lakeview properties and in nearby communities like Jerith in Good Hope: aluminum ornamental fencing with classic picket styles, vinyl privacy fencing including the heavier-duty profiles used on larger lots, aluminum handrail and stair railing systems, and picket and pool-code fence sections. When a repair needs parts, we match OEM Jerith pickets, rails, posts, and brackets whenever they’re available so profiles, colors, and warranties line up. For discontinued colors or hardware, we use equal-quality aftermarket components and tell you which is which before we order. If a single damaged section or gate is the problem, we repair it. We only recommend full replacement when the posts or a long run of pickets are compromised.
This Jerith work is part of what we mean by Jerith sales & service: we source the right components and we stand behind the install.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Lakeview
What you’ll pay depends on lot size, soil conditions at the post locations, the length of the run, and whether the county requires a septic or well clearance review. Here are the ranges we quote for the two Jerith projects we do most often in Lakeview:
| Service | Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
A free estimate from us includes a site visit, a line-by-line scope, and a written quote with the part type listed so you can see what’s OEM and what isn’t. We’ll tell you exactly what you’re getting and why. Call (866) 623-7205 to schedule yours.
Serving Lakeview, CA — Our Local Coverage Area
We’re based in the Lakeview area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Lakeview
Often yes. Because Lakeview is unincorporated, many fence projects require well and septic sign-off from Riverside County in addition to the building permit, especially on larger lots where a septic field or well head sits near the proposed fence line. We map those clearances before we set any posts.
Jerith vinyl holds up well when it’s installed with the right footings and fasteners for this valley’s conditions. The problems we see are usually installation issues: shallow posts in expansive soil, panels racked by wind, or pickets that failed after years of direct afternoon sun. We install to Lakeview conditions, not a generic spec.
Yes, and that’s our default approach. We match OEM Jerith pickets, rails, and posts when they’re available, or tell you plainly when an equal-quality aftermarket component is needed. Full replacement only makes sense when the posts or a long run of pickets are compromised. Call (866) 623-7205 and we’ll tell you which situation you’re in.
Usually heat cycling and wind load have worn the hinges or shifted the post, not the gate frame itself. We replace hinges, reset the post if needed, and re-align the panel so the latch catches clean. It’s a common fix on Lakeview gates heading into Santa Ana season, and the same approach we use for Jerith repair in Perris.
Yes. We run Jerith fence and gate work alongside additions and ADU construction under one contract, which means one accountable contractor for the fence, the structure, and the permit coordination with Riverside County. Call (866) 623-7205 for an exact scope and quote, estimates are free.
Service Areas Near Lakeview
Besides Lakeview service area work, we take Jerith fence and gate calls from Placentia, Lakeland Village, Norco, and the surrounding Riverside County communities. For Jerith work just outside the area, see Jerith service in Colton and Jerith service in Rialto.
Book Your Jerith Service in Lakeview Today
If your Jerith fence line needs repair, replacement, or is part of a bigger project on your Lakeview lot, call (866) 623-7205 for a free estimate. We’ll walk the property, check the county requirements, and give you a written scope before any work starts.
Written by Nolan Breckett, Owner at Square Deal Contractors, serving Lakeview and the surrounding Riverside County communities.