Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Running Springs, CA | Square Deal Contractors
We provide independent Mr-Glass service across Running Springs, from frameless shower enclosures to mirrored closet doors and custom glass panels. The thing that makes our Mr-Glass work here different is that we know the mountain. At 6,000 feet inside the San Bernardino National Forest, Running Springs construction means fighting freeze-thaw cycles, sloped lots, and wildfire-hardening codes that flatland contractors never touch. If your Mr-Glass enclosure is sagging, leaking, or racked out of square from snowmelt settling, call Nolan Breckett and the Square Deal team at (866) 623-7205 for a free estimate. We’ll tell you exactly what’s going on and what it’ll take to fix it right.
Why Running Springs Residents Choose Us for Mr-Glass Service
We’ve installed and serviced the Mr-Glass line across the San Bernardino Mountains for years, and we know its hardware quirks and glass sizing tolerances the way you only learn by doing the work. Frameless hinged enclosures, semi-frameless sliding bypass doors, mirrored closet doors – we’ve handled every configuration this brand puts out, in cabins built in 1968 and rebuilds finished last year. Nolan grew up in Baker Ranch and learned construction through the hands-on program at Saddleback College, and that background matters when you’re diagnosing why a hinge is binding or a panel cracked. We understand what freeze-thaw does to a Mr-Glass pivot, which sealants hold up at altitude, and why a cabin on pier-and-post footings shifts harder than any house on a valley slab. We’re an independent installer and repair provider, not authorized by Mr-Glass, so we can recommend repair when it’s honest or a full replacement enclosure when it’s not. That’s the whole point of dealing square.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Running Springs
- Hinge and pivot corrosion from freeze-thaw. Running Springs cabins with unheated bathrooms let moisture freeze inside Mr-Glass hinge pin gaps. The pivots corrode, the door sags and binds within a few seasons, and eventually the glass chips at the edge. We pull the hardware, assess whether OEM replacement hinges are still supported, and re-hang the door with cold-rated pivots when OEM parts are discontinued.
- Silicone and gasket shrinkage at altitude. Low-humidity summers and cold winters dry out Mr-Glass sliding bypass seals faster than you’d see in San Bernardino or Redlands. Water tracks out of the shower base and onto tile or subfloor. Re-sealing with an altitude-appropriate sealant and fresh gaskets stops the leak before rot starts.
- Sloped-lot settling racking the enclosure frame. Old cabins on pier-and-post foundations shift with spring snowmelt runoff. The Mr-Glass frame twists half an inch out of square, and the glass edge drags or cracks. We re-square the framing, sister joists when needed, and reset the enclosure on a true base.
- Template errors on out-of-square legacy walls. 1960s-80s A-frames and chalets in Running Springs rarely have plumb surrounds. Off-spec Mr-Glass panels crack at custom-cut edges if the measurement wasn’t taken wall-to-wall at multiple points. We measure the way mountain work demands: every corner, every reveal, every discrepancy written down.
- Roller seizure in unheated winter cabins. Sliding bypass doors with Mr-Glass rollers that sat through a decade of unheated winters seize up completely. The door won’t budge. We replace rollers, or convert the opening to a frameless hinged enclosure when that serves the owner better.
Mr-Glass Service in Running Springs: What Local Conditions Mean for Your Equipment
The 2003 Old Fire tore through Running Springs and the surrounding mountains, and that event still shapes every Mr-Glass job we walk into. The enclosures we encounter split into two camps: original mid-century cabin bathrooms on out-of-square walls needing fully custom glass, and post-2003 rebuilds with clean framing where a stock-size frameless unit drops in. You have to know which building you’re in before ordering. Up along the hillside near Arrowbear, we worked on a 1970s chalet where the Mr-Glass sliding bypass door had seized rollers from years of unheated winters, and snowmelt runoff had racked the surround frame nearly half an inch out of square. We pulled the old glass, re-squared and sistered the shower framing, then set a new frameless Mr-Glass hinged enclosure with cold-rated pivots and fresh silicone. The door swings clean now, with no track leak onto the tile. That’s the difference between knowing Mr-Glass and knowing Running Springs. Most contractors know one or the other.
Mr-Glass Models & Products We Service in Running Springs
We work on Mr-Glass frameless hinged shower enclosures in 3/8-inch and 1/2-inch glass, semi-frameless sliding bypass shower doors, mirrored closet and interior glass doors, and custom-cut glass panels and fixed shower screens. For parts, we source OEM Mr-Glass hinges, rollers, seals, and door handles where the model is still supported, and match quality aftermarket hardware rated for cold-weather cycles when OEM parts are discontinued or back-ordered. We keep common cold-rated pivots, seals, and roller sets in our local stock so Mr-Glass service in Lake Arrowhead and Running Springs turnaround doesn’t drag. And we’ll tell you straight when re-hinging and re-sealing a sound enclosure is cheaper than replacement, and when a cracked or delaminated panel means a new custom-cut glass unit is the only safe call.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Running Springs
Pricing for Mr-Glass service in Highland and Running Springs depends on what you’re starting with and what the mountain has done to it. A clean post-2003 rebuild takes a stock enclosure at the low end. A 1960s A-frame with out-of-plumb walls needs custom glass, re-framing, and more labor, which pushes cost up. Every estimate includes a line-item breakdown so you know what you’re paying for before we order anything. Here’s what you’re looking at:
| Service | Typical Range |
|---|---|
| Frameless Glass Shower Enclosure (Walk-In Shower Installation) | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Full Bathroom Remodel | $9,000 – $28,000 |
Call (866) 623-7205 for a free estimate. Nolan will walk you through the scope, the materials, and the honest number.
Serving Running Springs, CA — Our Local Coverage Area
We’re based in the Running Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Running Springs
At 6,000 feet, unheated mountain bathrooms let moisture freeze inside hinge pin gaps through winter, which corrodes pivots far faster than the mild, dry conditions in San Bernardino or Redlands below. The fix is usually cold-rated replacement hardware and, when the bathroom stays unheated, a conversation about a small wall heater to keep condensation from settling. Call (866) 623-7205 and we’ll inspect what’s on there now.
Yes, but it requires custom-cut glass measured at multiple points wall-to-wall, not a stock unit ordered off a spec sheet. We’ve set frameless Mr-Glass panels in chalets where the surround was an inch out of square by shimming and re-framing first, then templating the glass to the finished opening. Get your free estimate here: (866) 623-7205.
Usually, yes. Post-2003 rebuilds were framed with modern materials and tighter tolerances, so stock-size semi-frameless and frameless Mr-Glass units typically drop in without custom templating. That keeps material and labor costs lower. Call (866) 623-7205 for an exact quote based on your bathroom.
Often, yes. If the glass is sound and the frame hasn’t been twisted by foundation movement, we replace the rollers, re-seal the gaskets, and re-align the track. We’ll tell you honestly when a repair holds for years and when a cracked panel means replacement is the only safe call. Estimates are free at (866) 623-7205.
It absolutely can. Cabin foundations on pier-and-post footings shift as snowmelt saturates the soil each spring, which racks Mr-Glass frames out of square over time. Glass edges chip or drag, and silicone joints fail. We’ll assess whether the enclosure needs resetting or if there’s a drainage issue worth addressing at the foundation level. Call (866) 623-7205 to schedule a look.
Service Areas Near Running Springs
We take Mr-Glass calls throughout the San Bernardino Mountains and into the nearby foothill communities. That includes Mr-Glass service in Oak Hills, Mr-Glass service in Phelan, and mountain and valley work across Placentia, Westminster, Lakeland Village, Stanton, Fullerton, and Norco. If you’re unsure whether we cover your street, call and ask.
Book Your Mr-Glass Service in Running Springs Today
If your Mr-Glass enclosure is sagging, leaking, or out of square, don’t wait for the next freeze-thaw cycle to make it worse. Call Square Deal Contractors at (866) 623-7205 for a free estimate. Know what you’re getting into before the first nail goes in. We’ll come out, look it over, and give you a straight number.
Written by Nolan Breckett, Owner at Square Deal Contractors, serving Running Springs and the San Bernardino Mountains.