Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Cypress, CA | Square Deal Contractors
We’re Square Deal Contractors, and we install and repair Unilock hardscape systems across Cypress as an independent contractor. We source through Unilock’s dealer network rather than acting as the manufacturer. The one thing that makes our Unilock work here different: we’ve laid pavers, walls, and steps through Cypress’s older slab-on-grade tracts long enough to know the base prep these lots actually need. Call (866) 623-7205 for a free estimate.
Why Cypress Residents Choose Us for Unilock Service
Most Cypress General Contractor driveways and patios aren’t new-landscape installations. They’re replacements for original 1950s-70s concrete or thin asphalt aprons poured when this city was built out around the aerospace boom. That changes everything about how Unilock work gets done here, and we’ve spent enough time on these lots to know exactly what’s under them before we start digging.
Nolan Breckett, our owner, grew up in Baker Ranch and learned construction through Saddleback College’s construction technology program. He’s watched Orange County’s postwar tracts age for three decades and has a straight way of telling you what your base needs and why. As an Unilock sales & service contractor, we pull from the brand’s dealer network for genuine pavers and wall units, so repairs blend with the field instead of standing out like a patch. We backfill with correct base aggregate and polymeric sand, not a quick top-dress. One contractor, every phase, from roofline to backyard.
Styles & brands we work with







Common Unilock Construction Problems We Solve in Cypress
- Efflorescence and joint-sand loss on Brussels Block driveways. Cypress sits in the coastal-influenced Orange County plain, so mornings bring a marine layer that lingers on pavers until the afternoon sun burns it off. That repeated damp-to-dry cycle draws salts to the surface and loosens joint sand faster than inland cities see. We clean, re-sand, and seal where it makes sense, and we’ll tell you when it doesn’t.
- Edge spalling and shifting on driveways and walkways. Many Cypress tract homes had original concrete aprons poured only a few inches thick over unimproved soil. When somebody laid pavers directly on top of that, the edges start chipping and the field shifts. We strip and re-base to the depths Unilock requires. A paver that’s structurally sound gets a lift-and-rebase. A crushed one gets replaced.
- Polymeric joint sand washing out at patio edges. Downspouts on Cypress roof lines often dump runoff straight onto the paver perimeter. That concentrated flow erodes joint sand and invites weeds. We redirect drainage and re-sand with a product suited to the moisture load, not just whatever’s on the truck.
- Settling and lippage in Brussel Dimensional Stone retaining walls. Older tree roots and decades-old pool decking undermine bases in ways the original drawings never anticipated. When a wall starts leaning or a course separates, the fix is usually rebuilding the base, not shimming the face.
- Widespread settlement on paver driveways. This is the one where honest advice matters most. If half your Cypress driveway has sunk because the base failed, patching individual pavers just moves the problem. Full base rebuild is the only fix that lasts, and we’ll show you why on the estimate, not after the job starts.
Unilock Service in Cypress: What Local Conditions Mean for Your Equipment
Cypress is a master-planned, largely built-out postwar suburb. Almost every construction job here is a remodel, addition, or rebuild inside an established tract, not new development. For Unilock owners, that means your driveway or patio is probably replacing original 1950s-70s concrete or thin asphalt rather than starting from bare ground. The original apron under many of these tract homes, especially in the 90630 ZIP, was often poured three inches thick over unimproved soil with no aggregate base at all. That’s not enough to hold pavers through Cypress’s damp marine-layer mornings, and it’s the root cause of most of the shifting we see. We routinely strip and re-base old slabs to the depths Unilock requires before any paver goes down, and that’s the difference between a driveway that looks good for two years and one that holds for twenty. Know what you’re getting into before the first nail goes in.
Unilock Models & Products We Service in Cypress
We work with the Unilock lines most common across Garden Grove Unilock service areas and Cypress’s residential tracts: Brussels Block pavers for driveways and walkways, Beacon Hill Flagstone for patios with a more natural flagstone look, Brussel Dimensional Stone wall units for retaining walls and sitting walls, and Town Hall pavers for tighter geometric patterns. We use genuine Unilock pavers, wall units, and matching color lots so any repair blends with the field. For parts and materials, we keep commonly needed aggregates and polymeric sands on hand for faster Cypress turnaround, and we order matching Unilock product through the brand’s dealer network when a job calls for a specific color lot or discontinued pattern. No aftermarket paver goes into a Unilock field on our watch.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Cypress
What drives cost here is what’s under the pavers. If your original apron is still structurally sound and we can work over it with proper preparation, the job stays on the lower end. If we’re pulling up three inches of cracked concrete and re-excavating to full Unilock base depth, the scope (and price) goes up. Every estimate includes a written line-item scope so you see exactly what you’re paying for before work starts.
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
These are market-calibrated ranges for Cypress and reflect what we see on tract lots across 90630. Your exact number depends on square footage, base condition, access, and pattern choice. Call (866) 623-7205 for a free estimate with a written line-item quote.
Serving Cypress, CA — Our Local Coverage Area
We’re based in the Cypress area and know this community well, with Unilock in Stanton also within our service reach. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Cypress
Sometimes yes, sometimes no, and it depends entirely on the slab condition. If the concrete is structurally sound with no major cracking or settlement, we can prepare the surface and set pavers over it. If the apron is cracked, spalling, or only a few inches thick over unimproved soil (which we find constantly in Cypress’s 1950s-70s tracts), setting over it just transfers the failure to your new pavers. We’ll inspect it, tell you straight which camp yours falls in, and base the estimate on reality. Call (866) 623-7205 to schedule a free assessment.
Usually it’s roof runoff. Cypress downspouts often discharge directly onto the paver edge, and that concentrated flow scours polymeric sand faster than rain alone ever would. The marine-layer damp doesn’t help either, keeping sand moist longer so it clings to shoes and gets tracked away. The fix is redirecting drainage before re-sanding, or you’ll be back out there with a broom every few months. We’ll trace the water path during the estimate and include drainage correction in the scope where it’s needed.
For Cypress’s expansive but poor-draining native soils, we typically excavate and compact a minimum of four to six inches of aggregate base under a residential paver driveway, with additional depth where the original slab was poured thin or the soil is unimproved. That’s deeper than what many original aprons were built on, and it’s the difference between a stable field and one that shifts with the seasons. Your exact depth gets specified in the written scope after we see what’s under the surface.
In most cases, paver patio installation doesn’t require a City of Unilock in La Palma or Cypress building permit, but driveway work can trigger permitting depending on scope, especially if you’re changing the approach, altering drainage patterns, or working near the right-of-way. HOA rules in Cypress tracts may also apply. We handle permitting when it’s required and can tell you early in the process whether your project falls into the permit category or not. No runaround, no surprise invoices.
Yes. We source matching Unilock pavers through the brand’s dealer network using your original color lot information, and we’ll lay the repair in the same pattern so the transition is nearly invisible. Where color lot information isn’t available, we’ll bring samples and match on-site. Keep in mind that sun exposure and age can shift paver color slightly, so a replacement may read a touch different for the first year until it weathers in. Call (866) 623-7205 and we’ll take a look.
Service Areas Near Cypress
Our Unilock crews work throughout the Orange County tract communities around Cypress, including Cypress service area neighborhoods, Placentia, Westminster, Stanton, and Fullerton. For Unilock work specifically in neighboring cities, see our Unilock service in Buena Park and Unilock service in Wildomar pages.
Book Your Unilock Service in Cypress Today
We’ll tell you exactly what you’re getting and why. Call (866) 623-7205 to schedule your free estimate, and we’ll walk your Cypress property with you, check the base, and put a written scope in your hands before any work starts.
Written by Nolan Breckett, Owner at Square Deal Contractors, serving Cypress and South Orange County.