Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Fountain Valley, CA | Square Deal Contractors
Square Deal Contractors provides independent Unilock paver and wall installation, repair, and rebuild service across Fountain Valley, CA, and Unilock repair in Costa Mesa. We are not a manufacturer dealer or authorized affiliate; we are a full-scope general contractor that works with Unilock’s Brussels Block, Uni-Stone, Estate Wall, Town Hall, and Beacon Hill lines because they hold up when the base beneath them is done right. The thing that separates Unilock work in Fountain Valley from everywhere else is the lot itself: wide, shallow Segerstrom tract parcels force every patio and driveway decision through drainage, grade, and setback constraints before a single paver gets laid. Call us at (866) 623-7205 and we will tell you straight what your yard actually needs.
Why Fountain Valley Residents Choose Us for Unilock Service
Nolan Breckett grew up in South Orange County and cut his teeth on tract-home remodels and additions across Fountain Valley, where the construction questions are rarely about the material and almost always about the ground it sits on. We know the difference between an efflorescence bloom that a good cleaning fixes and a segmental wall that is failing because its base was never compacted for Fountain Valley’s clay-heavy fill. Because we are a full general contractor, not a hardscape-only outfit, we catch the things a paver-only crew misses: how the patio ties into the stucco weep line, where the lot drains toward the garage, and whether a raised Estate Wall planter needs to be pulled into the design-review drawings. One contractor, every phase, from roofline to backyard.
Styles & brands we work with







Common Unilock Construction Problems We Solve in Fountain Valley
- Efflorescence on Uni-Stone and Brussels Block after dry-season irrigation and marine-layer mornings. Fountain Valley’s coastal-inland air holds enough moisture that mineral salts wick through pavers, then the Santa Ana dry-down leaves a chalky white film that homeowners often mistake for permanent staining. It is usually a repair job, not a teardown, and we can tell you which after the first look.
- Sand joint erosion and paver shifting where wide, shallow tract lots drain a whole yard to one low corner. The original Segerstrom subdivisions were graded flat and fast, so many backyards shed water toward the house rather than toward the street. Winter rains wash polymeric sand out of the low-side joints, and the pavers start to wander. We re-grade the base and re-point with a stabilized joint compound that actually survives Fountain Valley’s wet-dry cycle.
- Segmental retaining wall movement on clay-heavy soil. Estate Wall and Uni-Stone wall units set on an underbuilt base will lean and open up joints as the clay expands through the winter and contracts hard during the dry-down. We rebuild the footing with proper aggregate depth and geotextile separation, then reset the same Unilock units where they are still sound.
- Edge chipping and UV fading along driveway border courses. Fountain Valley driveways get hammered by delivery trucks and RVs that track over the same Unilock border course every time they pull in. Combined with sun exposure, the border shows age faster than the field. We replace border units with matching Brussels Block or Uni-Stone and re-cut where needed.
- Garage-door ponding from settled driveways. A lot of the 1960s and 70s driveways in Fountain Valley were built over sand-joint bases that have compacted unevenly toward the garage. Water sheets under the door during Santa Ana rain events. That is a base failure, not a paver failure, and we fix it by pulling, re-grading, and resetting.
Unilock Service in Fountain Valley: What Local Conditions Mean for Your Equipment
Because Fountain Valley’s Segerstrom-era lots were platted wide and shallow, the backyard patio is almost always the only buildable open space left. That means an Unilock paver patio job here frequently has to tie into a raised segmental wall to hold grade, and the wall gets the same planning scrutiny as a rear addition, especially on the 92708 side closer to the Mile Square grid. Fountain Valley’s design-review process is not a formality. Setback and lot-coverage limits on these parcels are tight, and a wall that pushes grade toward a neighbor’s sight line can stall a permit for months. We have walked enough Fountain Valley jobs through planning to know exactly what the reviewers will ask about drainage, wall height, and property-line offsets. Know what you’re getting into before the first nail goes in.
Unilock Models & Products We Service in Fountain Valley
We install, repair, and rebuild Unilock’s Brussels Block, Brussels Dimensional, Brussels Fullnose, Uni-Stone, Estate Wall, Town Hall, and Beacon Hill lines. For matching existing runs, we source Unilock’s own paver and wall units so the repair does not look like a patch. For consumables, polymeric joint sand, geotextile fabric, and base aggregate, we use quality aftermarket materials rather than paying OEM markup on items that do not touch the surface. That keeps the cost down without cutting corners where it matters. Unilock’s other regional pages, including our Unilock sales & service work, follow the same repair-first logic.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Fountain Valley
Every Fountain Valley Unilock job gets a written, line-item estimate before we start, and the scope does not change unless you change it. What drives cost is almost always the base: if the existing substrate is sound, a repair is straightforward. If fifty years of clay movement and poor drainage have failed the base, the substrate gets rebuilt first. Here are the ranges we typically see around Fountain Valley:
| Service | Typical Cost Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Those numbers are project-specific and subject to a formal site visit, including for Unilock service in Westminster. Call (866) 623-7205 to schedule a free estimate and we will tell you exactly what you’re getting and why it costs what it costs.
Serving Fountain Valley, CA — Our Local Coverage Area
We’re based in the Fountain Valley area and also handle Unilock in Huntington Beach, Costa Mesa, Westminster, and Midway City. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Fountain Valley
Can you match my existing Unilock Brussels Block when the driveway needs a partial rebuild? Yes, we source Unilock’s own Brussels Block units to match the existing field, and we re-cut as needed so the repaired section blends with the original run. Call (866) 623-7205 and we will take a look at the driveway and give you an exact scope.
Why does my Unilock patio have white powder on it after the dry season? That is efflorescence, mineral salts wicking to the surface from moisture pulled through the pavers during Fountain Valley’s damp mornings and dry Santa Ana cycles. It is usually a cleaning and sealing repair, not a paver replacement. Call (866) 623-7205 and we will confirm which one you have.
Do I need a permit for a new Unilock paver patio in Fountain Valley? A simple paver patio at grade generally does not need a permit, but anything involving a raised segmental wall, grade change, or drainage alteration on a wide-shallow tract lot often goes through Fountain Valley design review. We pull the right paperwork either way and tell you at the estimate stage whether you need it.
Will an Unilock estate wall hold up on the clay soil behind a Fountain Valley tract home? It will if the base is built for it. The clay-heavy fill behind most Fountain Valley homes expands and contracts hard through the seasons, so the wall needs a deeper aggregate footing and proper geotextile separation under the units. We rebuild failed walls that way and the same Unilock units stay in place.
Can you repair a sunken section of Unilock driveway without redoing the whole thing? Often yes, we pull the affected section, re-grade and compact the base, reset the pavers, and re-point the joints. If the settlement traces to a deeper substrate failure, we will show you exactly what needs rebuilding before any work starts. Call (866) 623-7205 for a free estimate and we will walk it with you.
Service Areas Near Fountain Valley
Beyond Fountain Valley, we serve Placentia, Westminster, Stanton, Fullerton, and the adjacent communities around the 92708 and 92728 ZIPs. If you are in one of those areas and need Unilock work, you can also find us through our Fountain Valley service area page. For closer looks at Unilock projects in neighboring cities, see Unilock service in El Cerrito Corona and Unilock service in Garden Grove.
Book Your Unilock Service in Fountain Valley Today
Call (866) 623-7205 and tell us what your patio, driveway, or wall is doing. We will schedule a free estimate, walk the property with you, and tell you straight whether it is a repair or a rebuild. Same-week visits are usually available around Fountain Valley and for Unilock repair in Midway City.
Written by Nolan Breckett, Owner at Square Deal Contractors, serving Fountain Valley and South Orange County.