Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Romoland, CA | Square Deal Contractors
We provide independent CGI cabinet installation, refacing, and repair across Romoland, and the thing that separates our CGI work here is knowing how county permitting and old septic systems on I-215 parcels affect a kitchen or bath job before we ever open a box. We also offer Sun City CGI service for homeowners in that area. If you’re looking at peeling thermofoil doors or planning a full kitchen remodel with CGI cabinets in Romoland, call us at (866) 623-7205 for a straight answer and a free estimate. We’re not a CGI dealer or authorized warranty shop. We’re a general contractor that installs, refaces, and repairs CGI products on their own merits, and we’ve done it across this valley long enough to know what actually holds up.
Our team handles the full scope from roofline to backyard, which means your CGI cabinet work doesn’t happen in a vacuum. The same crew managing your kitchen can address the flooring, drywall, plumbing, and electrical around it under one contract, one timeline, and one accountable partner. That matters in Romoland, where older homes routinely need structural and utility corrections before cabinets go in.
Why Romoland Residents Choose Us for CGI Service
Most contractors who install CGI cabinets treat them like any other box on a wall. We don’t, because we’ve watched the same failure patterns repeat across Romoland kitchens and in nearby communities like CGI in Good Hope long enough to know which ones are worth repairing and which ones need full replacement. CGI builds their cabinetry around all-plywood box construction and dovetail drawer joints, which is a solid foundation. The problems we see here are almost always environmental: heat delamination on door faces, particleboard swelling at toe kicks, and drawer hardware loosening on out-of-level floors in older ranch homes.
Nolan Breckett runs our crew, and he’s spent decades watching the Inland Empire convert from farmland to master-planned subdivisions. He learned the trade through hands-on construction technology coursework and built his reputation on telling homeowners what’s actually happening with their house, not what sounds good in a sales pitch. Our approach to CGI work in Romoland follows that same habit: diagnose the failure, explain the fix, and give you a price that won’t change once work starts.
We source genuine CGI doors, drawer boxes, hinges, and slides when a match is needed. Where the original part isn’t available, we use quality aftermarket soft-close hardware and fasteners that hold up. We recommend refacing or partial replacement when the boxes are sound. Full replacement only ever gets recommended when particleboard has swollen beyond repair or the layout itself is failing.
Styles & brands we work with
Common CGI Construction Problems We Solve in Romoland
- Thermofoil and laminate door faces peeling at the edges. Romoland’s inland heat punishes south- and west-facing cabinet runs, and the thermofoil CGI lines are the first to delaminate. We see it most often on the lower rails of doors above the dishwasher and range, where heat and moisture cycle every day. The fix is usually replacing the door and drawer fronts while keeping the plywood boxes, provided the boxes are still square.
- Particleboard-box economy cabinets swelling at the toe kick after the humid season. Older Romoland ranch homes with kitchens over unconditioned crawl spaces trap humidity under the floor. When the monsoonal moisture shows up in late summer, particleboard wicks it from the bottom up. By the time a homeowner notices the toe kick peeling, the lower box panels are often already compromised. We replace those boxes with plywood and address the crawl space ventilation so it doesn’t recur.
- Dovetail drawers and hinges loosening on out-of-level floors. Many older large-parcel homes in Romoland have settled significantly. If RTA cabinets were assembled and installed without proper fastening or shimming, the drawers bind and the hinges pull loose within a year or two. We re-shim the frames, re-align the drawer slides, and replace stripped fasteners with ones sized for the material.
- Painted and stained finishes checking and fading from Santa Ana wind-driven dust. Cabinets on an exterior wall or in an unshaded addition take a beating here. The Santa Anas drive fine dust into every seam, and the UV load fades stained finishes unevenly. Refinishing alone won’t fix a deeply checked surface. Often the better answer is refacing with new doors in a more durable finish rather than sanding and re-spraying what’s already failed.
- Hardware and drawer slides wearing out ahead of the cabinet boxes. Soft-close slides have a service life measured in cycles, not years. In a busy Romoland kitchen, the hardware fails long before the plywood. We replace hinges and slides with aftermarket soft-close units that match the existing bore pattern where possible, saving the cost of new doors.
CGI Service in Romoland: What Local Conditions Mean for Your Equipment
Here’s what makes Romoland genuinely different from any neighboring city, and it changes how CGI work gets scoped here. Many of the older large-parcel properties along the I-215 corridor have undocumented septic systems and abandoned agricultural wells sitting under the ground. Those don’t just disappear when a kitchen or bath remodel starts. Riverside County permitting requires that abandoned wells be properly destroyed and septic systems be evaluated, connected, or capped before new construction clears. We’ve seen county inspectors put a kitchen remodel on hold because a long-forgotten well casing was discovered under where the new island was supposed to sit. In a new tract home in neighboring cities like CGI in Quail Valley, that never comes up. In Romoland, it’s a regular part of the pre-construction conversation.
On a Heritage Lake-area kitchen remodel in a 2021-built tract home, our crew found the builder-grade thermofoil CGI cabinet doors peeling at the lower rails while the plywood boxes were still square. Rather than tear out the whole kitchen, we replaced the door and drawer fronts, re-shimmed the frames, and added soft-close hinges. The total cost was a fraction of a full reface, and the fix was exactly what the heat-delamination problem required. That’s the kind of triage decision we make for Romoland homeowners every month.
Know what you’re getting into before the first nail goes in. That’s how Nolan puts it, and it applies doubly to any project on a rural parcel in this community.
CGI Models & Products We Service in Romoland
We work on the full CGI product range sold through kitchen and bath retailers: the Ready-to-Assemble shaker and raised-panel kitchen cabinet sets, the euro-style frameless laminate and thermofoil lines, the vanity and linen cabinet collections for bath remodels, and the all-plywood painted and stained shaker door and drawer-front collections. If you’re not sure which line you have, we can identify it from the door profile and box construction during the estimate.
Our parts approach is straightforward. We source genuine CGI doors, drawer boxes, hinges, and slides when a match is available, and we stock the most common soft-close hinge and slide replacements for faster Romoland turnaround. When the original part is discontinued, we’ll tell you that and show you the aftermarket option before we order it. No surprises on the invoice, and no installing a part we wouldn’t put in our own kitchen. For a broader look at the brand and our approach, see our CGI sales & service page.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Romoland
CGI project pricing depends on the scope, the condition of the existing boxes, and what the Romoland property requires before install. A vanity in a small bathroom is a one-day job. A full kitchen with permitting, septic or well complications, and finish carpentry is a multi-week project. Here are the ranges we quote across Romoland:
| Project | Typical Romoland Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
What drives the cost is rarely the CGI cabinets themselves. It’s the condition of the subfloor, the plumbing and electrical corrections, the permit path through Riverside County, and whether the boxes you have are worth keeping. Our free estimate includes a written line-item quote so you see exactly where the money goes. Call (866) 623-7205 to schedule one, and we’ll walk you through the scope before you commit to anything.
Serving Romoland, CA — Our Local Coverage Area
We’re based in the Romoland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Romoland
The peeling you’re seeing is thermofoil delamination, and in Romoland it’s almost always heat-driven. South- and west-facing cabinet runs absorb direct inland sun through windows, and the heat cycles cause the thermofoil to separate from the MDF door core at the edges. If the boxes are still square plywood, replacing the doors and drawer fronts fixes it. If the boxes are particleboard and swollen, we’ll show you that and recommend full replacement. Call (866) 623-7205 to have us look at what’s peeling and tell you which path makes sense.
Yes, in most cases we can. CGI runs specific door profiles and finish codes, and we source genuine CGI doors and drawer boxes to match. The challenge comes when a line has been discontinued or the finish has faded significantly from sun exposure. We’ll tell you honestly if a match will be visible, and if so, we’ll price partial refacing so the whole run looks consistent. Give us a call at (866) 623-7205 with your cabinet line and we’ll tell you what’s available.
The all-plywood boxes and dovetail drawers hold up well. The thermofoil and laminate door lines are the weak point in Romoland’s inland heat, especially on sun-facing runs. If you’re planning a new install, we’ll steer you toward the painted or stained shaker line with a more heat-tolerant finish. If you’re repairing an existing install, we’ll replace the failed door faces and add heat-blocking window film where it makes sense. Either way, the decision is based on what your kitchen actually faces, not a generic recommendation.
It can, and this is uniquely a Romoland problem. Older parcels along the I-215 corridor often have undocumented septic systems and abandoned agricultural wells, and Riverside County requires those to be located, evaluated, and properly abandoned or connected before the permit clears. If you’re on an older large parcel, we’ll flag this early in the estimate so it doesn’t stall your project mid-construction. Call (866) 623-7205 and we’ll help you figure out what your property likely requires.
Yes, and we do it regularly. CGI’s vanity and linen cabinet collections have compact widths that fit tight bath footprints, and we install them with the same shimming and fastening discipline we use on full kitchens. In a small Romoland bathroom, plumbing repositioning is usually the bigger cost driver than the vanity itself. We’ll quote both clearly. Estimates are free, even for a single vanity.
Service Areas Near Romoland
While this page focuses on Romoland, our crews also serve nearby communities across the Inland Empire. You’ll find the same independent CGI service approach in CGI service in Claremont and CGI service in Murrieta Hot Springs. Our full coverage footprint across the region is outlined on the Romoland service area page, which includes the ZIP codes and neighborhoods we regularly work in.
Book Your CGI Service in Romoland Today
We’ll come out, look at your cabinets, check the boxes and the layout, and tell you what’s worth fixing and what isn’t. No runaround, no surprise invoices. Call (866) 623-7205 to schedule your free estimate for CGI service in Romoland.
Written by Nolan Breckett, Owner at Square Deal Contractors, serving Romoland and the greater Inland Empire.